To perform a packet capture directly on an Adtran device do the following:
ip access-list extended CAPTURE permit ip any host 1.2.3.4 permit ip host 1.2.3.4 any
Where "1.2.3.4" is the IP that you want to watch. Then run debugging on that ACL:
debug ip packet CAPTURE detail
See https://supportforums.adtran.com/message/2248#2248 for more details.
This is ADNS Blog, a brand new site by Jason Scheewe that's just getting started. Things will be up and running here shortly, but you can subscribe in the meantime if you'd like to stay up to date and receive emails when new content is published!
Lately we've been selling a lot of products from Cisco's Small Business Pro line. I wanted to take some time to write about my experiences with these products, specifically how they (and you!) interact with the corresponding software tools. This will be a two parter that
Steps to take to repair a Windows Server that will not boot. The first step of course is to boot from the Windows setup CD / DVD / ISO and then go to the recovery command prompt. The following are things to try in order of simple to severe. bootrec /FixMbr bootrec
Join us Friday, March 25th from 2:00-3:00PM EDT for a presentation about asymmetric cryptography. This presentation is intended for people with some general non-technical knowledge. If you know what encryption and HTTPS are but don’t know how they work and would like to learn more, this presentation